link link

Nikon KeyMission 80 User Manual

Parts of the camera, Before pairing, Pairing procedure

Advertising
background image

CT6K01(11)

6MN72411-01

En

Procedure for Pairing for the First Time (for iOS Users)

Here, pairing refers to the setting used to connect the camera and smartphone or tablet (below, “smart device”)
through Bluetooth.

Parts of the Camera

15:30

d

(menu)

button

Shutter-release

button

Setup menu

Turn off

Before Pairing

Camera

• Insert a microSD memory card with sufficient free space into the camera.
• Check that the battery is sufficiently charged so that the camera does not turn off during the procedure.

The camera cannot be charged when it is set in the camera holder.

• To turn off the camera, press the d (menu) button and tap b (turn off ).

Smart device

• Two types of apps are available: “SnapBridge” and “SnapBridge 360/170”. Use “SnapBridge” when

pairing with this camera.

Do not pair from the Bluetooth setting screen of the smart device.

Pairing Procedure

1 Check that the camera is off (the screen is off).
2 Enable Bluetooth and Wi-Fi® on the smart device.

Do not pair from the Bluetooth setting screen of the smart device.

3 Install the SnapBridge app.
4 Press the shutter-release button or the d (menu) button to turn on the camera.

• On the language selection dialog, select a language by tapping.

5 Scroll through the screen, tap Set, scroll through the next

screen, and then tap Next.

• The camera enters pairing standby mode.

B

If You Tap Later

You can pair later by performing the following operation.
d

button M z setup menu M Camera settings M scroll

through the screen, then Network menu M Connect to smart
device

the camera to

the smart device.

Non-NFC enabled

devices: select Next.

Cancel

Next

and set SnapBridge

later from

the Network menu,

select Later.

Later

Set

Advertising