link link

HP LaserJet Ultra M106w User Manual

Important, Steps 1 - 3, Set up the control panel

Advertising
background image

Français ............ 4

English .............. 1

Português ....... 10

Español ............. 7

............... 13

Windows

1. For Windows 7 or lower, do not connect the USB cable before installing

the software. The installation process prompts to connect the cable at

the appropriate time. If the cable is already connected, restart the printer

when installation prompts to connect the cable.

2. Continue to

6. Locate or download the software installation files.”

NOTE: During Windows software installation, select the option to connect

through a network.

Mac

1. Connect the USB cable between the computer and the printer before

installing the software.

2. Continue to

6. Locate or download the software installation files.”

Perform a wireless installation

(wireless models only)

Before starting the installation, verify that the wireless access point is working

correctly. Make sure that the printer, router, and computer are all turned on

and that the computer is connected to the same wireless network that the

printer will be connected to.
If there is not a solid blue light on the top of the printer, go to Process A.
If there is a solid blue light on the top of the printer, go to Process B.

Process A

1. Place the CD in the CD-ROM drive, and then click Install. When the

Printer connections dialog appears, choose Configure to print over

the Wireless Network.

2. Follow the on-screen instructions.

Process B

1. Place the CD in the CD-ROM drive, and then click Install. When the

Printer connections dialog appears, choose Connect to a configured

Wireless Network printer.

2. Follow the on-screen instructions.
3. Select the printer detected by the software. If the printer cannot be

detected by the installer, manually input the printer’s IP address to

continue the installation.

NOTE: Print a configuration page to find the printer’s IP address. At the

printer control panel, press and hold the Resume/Cancel button for

5 seconds, and then release the Resume/Cancel button to print the

configuration page. The IP address is listed on the configuration page

in the Network Information section.

Manually configure the IP address

See the printer user guide for information on how to manually configure the

IP address

www.hp.com/support/ljM101

.

2

Wired (Ethernet) network connection

(optional)

Use a standard network cable.

1. Connect the network cable to the printer and to the network. Wait a few

minutes for the printer to acquire a network address.

2. Continue to

“6. Locate or download the software installation files.”

NOTE: During software installation, select the option to Connect through

a network.

IMPORTANT:

First, follow

Steps 1 - 3

on the printer hardware

setup poster, then continue

with

Step 4

.

www.hp.com/support/ljM101

www.register.hp.com

LaserJet Pro M101-M104,

LaserJet Ultra M105-M106

Getting Started Guide

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable.

4. Set up the control panel

At the printer control panel, check the LED status before beginning software installation.

5. Select a connection method

Canary_GSG_Expanded_G3Q34-90983.indd 1

5/31/2016 7:58:11 PM

G3Q34-91006

*G3Q34-91006*

*G3Q34-91006*

Advertising
This manual is related to the following products: